Panasonic DVCPRO AJ-CA901P Service Manual page 121

7. Press the "Program button" on programmer dialog.
* When progress bar reaches at the point of "100", the message appears "Programming Complete", then
PLD version upgrade is completed.
8. Click "OK button" on the "Programming complete dialog" message dialog.
Progress bar
Turn OFF → ON the power of the AJ-BS900HP/EN or AJ-CA900HP/EN.
9.
10. Confirm software version at DIAGNOSTIC menu page.

* MAX+PLUS II is registered trade mark of ALTERA
 
* Windows 95 and Windows 98 are registered trade mark of Microsoft

Corporation in the United States and/or other countries.

corporation in the United States and/or other countries.
INF-7