Mounting The Satisfy Kardan Tonearm - Clearaudio Satisfy Kardan User Manual

User manual / Bedienungsanleitung
3. Mounting the
Pic. 4: Mount tonearm base
Pic. 5: Putting the tonearm through the armboard
Pic. 6: Securing the tonearm
Made in Germany
Satisfy Kardan
tonearm
Take the clamping ring and place it on
the recess in the tonearm base.
Now you can attach the clamping ring to
the tonearm base with the 3 supplied M4
x 10 screws.
Make sure that the side hole of the
clamping ring remains accessible (see
Pic. 4).
First insert the tonearm cable and then
the tonearm foot of the
tonearm into the hole of the clamping
ring (Pic. 5).
Now fix the tonearm with the screws and
the hex wrench. Do not over-tighten for
later adjustments (Pic. 6)!
Satisfy Kardan
Page / Seite 9