Alignment And Adjustment Of The Cartridge - Clearaudio Satisfy Kardan User Manual

Hide thumbs Also See for Satisfy Kardan:

Table of Contents

Available languages

User manual / Bedienungsanleitung

5.2 Alignment and adjustment of the cartridge

Pic. 10: Alignment of the tonearm

Pic. 11: The tonearm tube must be absolutely parallel

Pic. 12: Stylus tip on reference point

Page / Seite 12

5.2 Alignment and adjustment of the

cartridge

Use the adjustment template, included in the scope

of the delivery for the final tonearm and cartridge

adjustment.

Place it directly on the turntable (without record)

and align it with the arrow pointing toward the

tonearm pivot point (Pic. 10).

Take the tonearm out of the rest position and align

it in the area of the cross lines.

Lower the tonearm and check the alignment.

The cartridge body must be aligned in the template

grid and the needle tip should be located in the

cross lines.

Also, the side and front edges of the housing have

to be parallel to the grid lines.

To correct the adjustment, loosen the screws of the

cartridge to move the cartridge in the headshell.

Re-check the setting again after you have tightened

the screws.

Table of Contents

Table of Contents