P.02: Unit For Temperature Display - Dometic RTX1000 Installation Manual

RTX 1000/2000, SPX 1200T
7.3

P.02: Unit for temperature display

The system can display the room temperature in °C or °F.
➤ Switch to configuration mode (chapter "Entering and exiting configuration
mode" on page 13).
✔ The display shows "P.01" and the symbol
➤ Press the
✔ The display shows "P.02" and the symbol lights up.
➤ Press the
✔ The code for the current setting is displayed:
– 0: °C
– 1: °F
➤ Use the
➤ Press the
✔ The set value is saved and is then applied when the system is restarted.
✔ You are then returned to the menu and can select another menu item by
pressing the
EN
or button to select the menu item P.02.
button to change the setting.
or button to select the desired temperature unit.
button to save the setting.
or button.
Configuring the system software
flashes.
15