Tools And Test Equipment - Motorola C380 Service Manual

Level 1 and 2 Service Manual

Tools and Test Equipment

Table 2. General Test Equipment and Tools
Motorola
1
Part Number
See Table 7 Charger
Antistatic Mat Kit (includes 66-80387A95 antistatic
0180386A82 mat, 66-80334B36 ground cord, and 42-80385A59
wrist band)
8102430Z04 GSM / DCS / PCS Test SIM
6680388B67 Disassembly tool, plastic with flat and pointed
ends (manual opening tool)
6680388B01 Tweezers, plastic
RSX4043-A Torque Driver
Torque Driver Bit T-6 Plus, Apex 440-6IP Torx Plus
—
or equivalent
2
HP34401A Digital Multimeter
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
6809485A73-O
1 and 2
C380
6809485A73-O
Table 2 list the tools and test equipment used on C380 telephones. Use either the
listed items or equivalents.
Description
Used to charge battery and to power phone
Provides protection from damage to phone caused
by electrostatic discharge (ESD)
Used to enable manual test mode
Used during assembly/disassembly of phone
Used during assembly/disassembly
Used to remove and replace screws
Used with torque driver
Used to measure battery voltage
May 14, 2004
Tools and Test Equipment
Application
23