Advertisement
In case of difficulty
SSE
A
ASE
I
EE
TT
OE
ES SE
IL
I
I
BY
A BERD ES
NN
I
a
a A a
SET
What appears to be a malfunction may not always be serious. A simple mis-operati
for service, first check the following items.
Symptom
Cause
on may cause trouble. Before consulting
Remedy
When
the POWER
switch is set to ON,
the indicators do not light and sound is
not reproduced.
The power
plug is disconnected
from the
power outlet.
Insert in securely.
Picture and sound are not reproduced.
. The connection cords are disconnected.
. The connection cords are connected im-
properly.
The source component
selected by the
input selector key is different from that
being played.
1. Connect
the
cords
securely
into
the
jacks.
. Check
connections,
and
correct as re-
quired.
. Press
the
input
selectdor
key of the
component to be listened to.
Sound is not reproduced.
. The SPEAKERS
key is set to OFF.
. The speaker cords are disconnected.
The speaker cords are short-circuited.
. Set the SPEAKERS
key to ON.
. Connect
the
cords
securely
speaker terminals.
. Connect the speaker cords properly.
to
the
Sound
from
the
rear
speakers
is not
reproduced or is at a low volume level.
1. The Surround mode is set to BYPASS.
The
rear
speaker
level
is set
to
the
minimum position.
. The source
is monaural
while the Sur-
round mode is Dolby Pro-Logic, Theater
or Stadium.
. Set to a desired Surround mode.
. Increase
the
rear
speaker
level
to an
optimum level.
. Set the Surround mode to SIMULATED.
The remote control does not work.
The DELAY TIME switch does not work.
Notes:
. The remote
controlling distance
is too
far.
. The batteries are exhausted.
The
surround
mode
is set to STADIUM,
SIMULATED
or BYPASS.
. Operate the remote control unit from a
closer position.
2. Replace the batteries.
The delay time cannot be adjusted in these
mode.
1. Since this unit is microprocessor-controlled, malfunction may occur due to external noise or interference. In such a case, unplug the
power cord first, then plug it into the power outlet while holding the TUNER key depressed. (Note that this clears the title and Surround
memory.)
2. Do not use contact cleaner for it sometimes cause malfunction.
Specially, contact cleaner containing oil could deform plastic parts.
Memory
backup feature
tions again.
This unit is provided with backup circuitry for various
memory functions. The memory will be backed up for a
period of about 3 days while the power cord of the unit
is disconnected from the power outlet. If the memory is
cleared,
perform
the programming
or storage Opera-
Speaker protection circuitry
lf the speaker cords are short-circuited,
the speaker
protection circuitry is activated and the sound Is muted.
In such a case, switch the POWER
key to OFF, remove
the short-circuit from the speaker cords, and switch the
POWER
key ON again. Normal operation will resume.
35
KA-V6000 (En)
Advertisement
