Advertisement
RC-V6000L
M@ Loading batteries into the remote control
unit
1. Remove the battery cover.
While gently pressing the battery cover located on the
rear of the remote contro! unit, slide it in the direction
of the arrow.
2. Insert the provided batteries. Take care to respect the
battery polarity (+, —), and be sure to close the cover
after inserting.
Note:
The batteries provided are to be used for checking the remote
control operations. Their service life may be short.
@ Replacing batteries
1. If the TRANSMIT
indicator does not light even when
the
operation
key is pressed,
the
batteries
are
ex-
hausted.
Replace the batteries. We recommend that the alkaline
batteries (LRO3/AM-4) which have longer service life
be used.
2. The
programmed
contents
are not immediately
lost
when the batteries are removed for replacement. How-
ever,
they could
be lost if the
unit is left without
batteries for more than 3 minutes. In such a case, the
programming should be performed again. The function
signals of the non-learning, or fixed keys are not lost
even in this case.
Note: —————__-—-________---__-----——
Avoid using old and new
batteries together, as this may cause
corrosion.
@ Operating
range
of the
remote
control
unit
The normal
operating
range
may change depending
on
temperature,
humidity,
and
other
environmental
condi-
tions, but it is roughly specified as shown in the figure on
the left.
Note:
If two or more remote control operation keys are to be pressed
successively,
press each
key securely and
leave an interval of
more than 1 second between presses.
Pressing a key immediately after pressing another key may cause
malfunction.
KA-V6000 (En)
17
Advertisement
