Advertisement
Operating instructions
Recording an audio source
When
CD is selected
Audio input display
Display
mn
Dubbing an audio source
Audio input display
(Gelato
Audio input display
Gs at ae
24
KA-V6000 (En)
Mi How
to record
sound
on cassette
decks
—
connected
to
the
TAPE1
and
TAPE2
jacks
. Press the POWER
key to ON.
. Press
the
desired
input
selector
key to select
the
recording source.
. Play the selected
component
and, at the same
time,
start recording
on cassette
decks
1 and
2 (Record
mode).
H@ How
to dub sound
from cassette
deck
1
ND
(connected
to the TAPE1
jacks) to cas-
sette deck
2 (connected
to the TAPE2
jacks)
. Press the POWER
key to ON.
. Press the TAPE1
input selector key.
. Start recording on cassette deck 2 (Record mode), then
immediately start playing cassette deck 1 (Play mode).
@ The
sound
output
from
cassette
deck
1 can
be
monitored during dubbing.
@ How to dub sound from cassette
deck 2
Notes:
ilts
2
(connected
to the TAPE2
jacks) to cas-
sette deck
1 (connected
to the TAPE1
jacks)
. Press the POWER
key to ON.
. Press the TAPE2
input selector key.
. Start recording on cassette deck 1 (Record mode), then
immediately start playing cassette deck 2 (Play mode).
@ The
sound
output
from
cassette
deck
2 can
be
monitored during dubbing.
If the selected dubbing source is a video component, only its
sound will be recorded on the cassette tape.
The signal dubbed or recorded on the cassette decks cannot
be processed
by the Surround
or tone control circuitry.
Advertisement
