Page 3
KAC-X10D COMPONENTS DESCRIPTION Ref. No. Application / Function Operation / Condition / Compatibility IC14~16 Dead time generating circuit It generates dead time not to penetrate the high-side and low-side PWM signal. IC17 NF circuit It applies negative return from output to D-class first phase.
KAC-X10D CIRCUIT DESCRIPTION NF Circuit It applies NF from rear and front of LC filter. For BTL output, it receives each output by differential amplification and applies feedback to the first phase. POWER AMP OUTPUT + POWER AMP OUTPUT +...
KAC-X10D CIRCUIT DESCRIPTION Abnormal Detection Circuit It compares signal levels of the current detecting circuit and It detects also unbalance operation. output voltage rectification circuit with a comparator. If current Resonance detecting signals detected with the new circuit > voltage, the detecting circuit operates to stop D-class cir- description X10D_2 are also input to this circuit causing ab- cuit.
(1Ω) ..............≥600W x 1 Weight ............3.5kg (7.72 lbs) Frequency Response (+0, -3dB) ......5Hz~200Hz Sensitivity (rated output) KENWOOD follows a policy of continuous advancements MAX ................0.2V in development. For this reason specifications may be MIN ................5.0V changed without notice.