Complete The Installation - Kohler Kumin K-104K37-SANA-CP Installation Instructions Manual

9. Complete the Installation

NOTE: Avoid the area in front of the sensor for 2 minutes after connections are
complete. The sensor will not function correctly if activated in the first 2 minutes.
Disconnect and reconnect the power to reset the sensor.
If applicable, uncover the drain.
Temporarily cover the sensor on the faucet or turn OFF the water supplies.
Using the provided key, install the aerator to the spout.
Uncover the sensors on the faucet or turn ON the water supplies.
Activate the faucet and check all connections for leaks. Make adjustments as
needed.
Run water through the spout for 1 minute. Check for leaks and make adjustments
as needed.
Kohler Co. 15
1561532-2-A