Kohler Kumin K-104K37-SANA-CP Installation Instructions Manual page 10

5. Install the Mixing Valve (If Included)
Flex
Hose
3/8"
If a mixing valve is included with your product, connect the flex hoses as shown.
Attach the provided flex hose to the control box inlet and the outlet of the mixing
valve.
Use a 3/8" compression connection (not provided) to attach the cold supply to the
cold inlet on the mixing valve (marked cold on the adjustment plate).
Use a 3/8" compression connection (not provided) to attach the hot supply to the
hot inlet on the mixing valve (marked hot on the adjustment plate).
Temperature Adjustment
Loosen the lock screw on the adjustment plate.
Rotate the adjustment plate to adjust the temperature.
Retighten the lock screw.
1561532-2-A
G1/2
Hot
3/8"
3/8" Compression
Lock Screw
10
Outlet
Cold
Adjustment plate to
set water temperature.
Kohler Co.