Table of Contents
Advertisement
Automatic oven cleaning
Using high temperatures, the function makes it easy to clean the interior of the appliance, as well as
some of the equipment supplied with it. During cleaning, fat residues and other impurities are
incinerated.
There are three pyrolysis (cleaning intensity) levels available, with varying duration of the process:
Level
Cleaning intensity
1
Quick cleaning
2
Medium-intensity cleaning
3
Intensive cleaning
NOTE: The more stubborn the dirt, the higher the level that should be selected.
Preparing for pyrolytic cleaning
Based on an average oven usage rate, we recommend pyrolytic cleaning once a month.
•
Remove all equipment from the oven, including the rack guides. Cleaning the equipment (all-purpose
deep or shallow baking trays) with pyrolysis is possible only if the oven is equipped with additional
wire guides (see chapter "Cleaning the supplied equipment with pyrolysis").
•
Remove all visible dirt and food residue from the oven.
•
Only start pyrolytic cleaning when the appliance is cooled.
•
If the oven is equipped with additional wire guides, insert the equipment into the second or third
level guides - never the first level.
•
When the pyrolytic cleaning process is complete and the oven has cooled down, the oven door
will be unlocked automatically.
•
Once the oven cavity has fully cooled down, wipe it with hot soapsuds and a soft cloth to remove
any residue (e.g. ashes).
38
pyrolysis
Cleaning purpose
For minor impurities
For noticeable major impurities
For stubborn and persistent
(older) impurities
1. Touch the
key to display extra functions on the display unit. Rotate
the KNOB so that the symbol
selection. Three cleaning intensity levels will appear on the display. Rotate
the KNOB to select the cleaning intensity level. The more stubborn the
dirt, the higher the level that should be selected. Medium level is selected
as the default setting.
Confirm your setting by pressing on the KNOB. Touch the
starts counting down.
2. After a certain period of time, oven door will be automatically locked
for your safety. Loc will appear on the display unit while the lock is
engaged.
3. When the program is completed, End will appear on the display unit
and an acoustic signal will be emitted.
Program duration
2hrs 15mins
2hrs 30mins
and P are lit up, and confirm your
2 hours
key. Time
Advertisement
Table of Contents
