Table of Contents
Advertisement
Appendix A
Device-Specific Information
Note For more information about default NI-DAQmx counter inputs, refer to Connecting
Counter Signals in the NI-DAQmx Help or the LabVIEW 8.x Help.
NI 6239 Specifications
Refer to the NI 6239 Specifications, available on the NI-DAQ Device
Document Browser or
on the NI 6239 device.
NI 6239 Accessory and Cabling Options
This section describes some cable and accessory options for the NI 6239
device. Refer to
Screw Terminal
National Instruments offers several styles of screw terminal connector
blocks. Use an SH37F-37M cable to connect an NI 6239 device to a
connector block, such as the following:
•
•
•
•
•
RTSI
Use RTSI bus cables to connect timing and synchronization signals among
PCI devices, such as M Series, E Series, CAN, and other measurement,
NI 6238/6239 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table A-2. NI 6239 Device Default NI-DAQmx Counter/Timer Pins (Continued)
Counter/Timer Signal
CTR 1 OUT
CTR 1 A
CTR 1 Z
CTR 1 B
ni.com/manuals
for other accessory options including new devices.
ni.com
CB-37F-HVD—37-pin DIN rail screw terminal block, UL
Recognized derated to 30 Vrms, 42.4 V
CB-37FH—Horizontal DIN-mountable terminal block with 37 screw
terminals
CB-37FV—Vertical DIN-mountable terminal block with 37 screw
terminals
CB-37F-LP—Low profile terminal block with 37 screw terminals
TB-2621—37-pin PXI screw terminal block, UL Recognized derated
to 30 Vrms, 42.4 V
, or 60 VDC
pk
A-6
Default Pin Number (Name)
36 (PFI 7)
P1.1
15 (PFI 3)
P0.3
34 (PFI 4)
P0.4
16 (PFI 5)
P0.5
, for more detailed information
, or 60 VDC
pk
Port
ni.com
Advertisement
Table of Contents
