Error Messages And Treatment - Pioneer MJ-D707 Operating Instructions Manual

Error Messages and Treatment
Message | Description Treatment
No Disc | @ MDis not loaded. @ Load an MD.
L
| @ The MD data cannot be read,
® Reload the MD.
Disc ERR | @ The disc is scratched. e Reload the MD.
@ The MD does not contain the TOC or the data is | e Use another MD.
| abnormal.
bo
a eed
a ---
-
?Disc @ The data is abnormal or the MD is out of standard. e Use another MD.
Disc Full
@ The MD has no space available for recording.
e
Use another recordable MD.
Blank Disc
@
The MD does not contain any recording. (It does not | @
If you want to play an MD, use an MD which
even contain the recording of the disc name.) has been recorded.
Playback MD ® Anattempt is made to record or edit a playback-only | e Usea recordable MD.
me MD. _ uy
Protected
e
The MD is protected against accidental erasure.
e@ Release the accidental erasure protection.
TOC Full @
The disc does not have the space for recording the track | e
Use another recordable MD.
number and character data (including disc/track
names).
_ = as = ; st a =
Can't REC
e
Recording is not completed correctly due to shock or | e
Restart recording or use another MD.
disc scratch.
- |
Temp Over
@ The temperature is too high.
| @ Turn power off and wait for a while.
|
7
Can't Edit @ Editing is not possible. e Retry editing by changing the stop position.
Name Full e
There is no space left for registering
a disc/track name. | e
Shorten the disc/track name.
Defect
e
Recording is interrupted due to disc scratch.
@ Use another recordable MD.
MECHA ERR -- @
The MD recorder is not functioning properly.
e® Turn power off and press the eject button.
(-- is a number or
symbol.)
Can't Copy @
Anattempt is made to record a copy-prohibited material. | e
Use a copy-permitted source (an ordinary CD,
etc.).
@ Record the analog input from the source,
Not Audio
e
The disc contains non-audio data.
@
Use another track.
e@ Use another MD.
alias 4
panels ee
eee ze
Sen
UTOC W ERR e@ The TOC data cannot be written properly due to shock | @ Turn power off and retry UTOC writing. (Be |
or disc scratch. | careful not to apply shock to the unit during
UTOC writing.)
UTOC ERR--
@ The recorded TOC data is not conforming to the MD | @
Use another MD.
{-- is a number or
standard or otherwise illegible.
e
Execute the ail erase function and record the
symbol.)
MD from the beginning.
Din Unlock
e@ The digital input is not a normal signal.
@
Check if the digital signal is connected properly
to the digital input jack.
TOC ERR -- Bs e The disc is scratched or otherwise damaged. e Use another MD.
(-- is a number or | e The TOC data cannot be read.
symbol.) e The MDis out of standard.
S10 Error
@
The internal communication with the mechanismis not | e
Turn power off then on again.
possible.
Also see "Troubleshooting".