Displaying pictures with a USB storage device
The built-in the ImageViewer application can display packaged images on a USB
storage device (e.g. USB flash drive, and USB disk), a digital camera, or other device.
You can connect a USB storage device to your projector.
Take a USB cable and connect the larger end to the USB A socket on the
projector, and smaller end to the USB port of the device. If you are using a USB
flash drive, connect it directly to the USB A socket.
The projector automatically display the thumbnails. Or your can manually select
USB Reader from the source selection bar.
The ImageView main screen is displayed and ready to use. The main screen is
displayed in Thumbnail Display Mode which shows the following four parts:
Current path, USB storage device name and page number
File and folder name display (i18N, multi-language)
Thumbnail images (120 x 120 pixels images)
Operation User Interface
Use the four directional buttons or page up/down button to move between pages/
folders. To Press and hold Menu and then press Enter to display the operation
user interface. Use
. To confirm the selection press Enter. The following buttons are supported
in the user interface.
Next: Display next page.
Previous: Display previous page.
to select the desired item and adjust the settings with