ViewSonic Pro8450w User Manual

Pro8450w user guide (english)

Hide thumbs Also See for Pro8450w:

User manual (79 pages)

Specification sheet (2 pages)

Buyer's manual (12 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for ViewSonic Pro8450w

Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is - Podręcznik użytkownika also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Page 2: Compliance Information
If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead. ViewSonic Pro8450w...
Page 3: Important Safety Instructions
ViewSonic Pro8450w...
Page 4: Declaration Of Rohs Compliance
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead). 4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic Pro8450w...
Page 5: Copyright Information
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic Wizard CD-ROM also ® provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: Pro8450w...
Page 6: Table Of Contents
Displaying pictures with a USB storage device ..........53 Maintenance ....55 Cleaning the Lens ......55 Cleaning the Projector Housing ..55 Cleaning the Filter Cover ....55 Replacing the Lamp ....... 56 Specifications ....58 Dimensions ........59 ViewSonic Pro8450w...
Page 7: Introduction
Less than 1 W power consumption in standby mode The information in this manual is subject to change without notices. The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. ViewSonic Pro8450w...
Page 8: Package Contents
When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries VGA Cable (D-SUB to D- ViewSonic CD Wizard Quick Start Guide SUB) Optional accessories Filter cover...
Page 9 Save the original shipping carton and Packing material; they will come-in handy if you ever to ship your unit. for maximum protection, repack your unit as it was originally packed at the factory. ViewSonic Pro8450w...
Page 10: Projector Overview
Projector Overview Front View Lens cap Filter cover Elevator button Speaker Elevator foot Focus ring Lens cap strap Zoom ring Projection lens Control panel Front IR remote control sensor Lamp cover Ventilation holes (intake) ViewSonic Pro8450w...
Page 11: Rear View
Ceiling mount holes (M4*8) Tilt-adjustment feet Security bar This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. Contact your dealer for information to mount the projector on a ceiling. ViewSonic Pro8450w...
Page 12: Using The Product
Enter to sub-menu and confirm the menu selection. SOURCE Display the source selection bar. MENU/EXIT Display or exit the on-screen display menus. Power Turn the projector on or off. Right/Panel key Activate panel key lock. Left/Blank Hide the screen picture. ViewSonic Pro8450w...
Page 13: Connection Ports
This connector supports USB flash drive display and wireless dongle for USB display. For LAN display/network control and web server. HDMI Connect HDMI output from video equipment to this jack. DC 12V Out 12V DC out MIC in Microphone input jack. ViewSonic Pro8450w...
Page 14 Connect composite video output from video equipment to this jack. Computer in 2 Connect image input signal (analog RGB or component) to this jack. Computer in 1 Connect image input signal (analog RGB or component) to this jack. ViewSonic Pro8450w...
Page 15: Remote Control
Resynchronize the projector to the input mouse modes. signal from a computer. This function is available for computer mode only. Blank Perform page down function when Cut off the screen temporarily. mouse mode is activated. Press again to cancel the Blank Screen function. ViewSonic Pro8450w...
Page 16: Using The Remote Mouse Control
(on a connected PC) remote control’s buttons. which responds to page up/down commands (like Microsoft PowerPoint), press Page Up/Page Down. To return to the normal mode, press Mouse again or other keys except for the mouse related multi- function keys. ViewSonic Pro8450w...
Page 17: Installing The Batteries
Batteries should not be in or near to fire or water, keep batteries in a dark, cool and dry place. If suspect battery leakage, wipe out the leakage and then replace new batteries. If the leakage adheres to your body or clothes, rinse well with water immediately. ViewSonic Pro8450w...
Page 18: Remote Control Operation
Do not drop the remote control or jolt it. Keep the remote control out of locations with excessively high temperature or humidity. Do not get water on the remote control or place wet objects on it. Do not disassemble the remote control. ViewSonic Pro8450w...
Page 19: Connection
“Package Contents” on page 6). They are commercially available from electronics stores. The connection illustrations above are for reference only. The rear connecting jacks available on the projector vary with each projector model. For detailed connection methods, see pages 18-21. ViewSonic Pro8450w...
Page 20: Connecting A Computer Or Monitor
DVI end of the cable to the DVI input socket of the video monitor. Connect the other end of the cable to the Monitor Out socket on the projector. Important The Monitor Out output only works when Computer in 1 or Computer in 2 is made to the projector. ViewSonic Pro8450w...
Page 21: Connecting Video Source Devices
Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here. “Connecting a composite Video source device” on page 21 for how to connect the projector to a composite Video device. ViewSonic Pro8450w...
Page 22: Connecting A Component Video Source Device
Also check that the signal cables have been connected correctly. RGB to component adapter (ViewSonic P/N: J2552-0212-00) Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: If so, you can continue with this procedure.
Page 23: Connecting A Composite Video Source Device
Also check that the signal cables have been connected correctly. You need only connect to this device using a composite Video connection if Component Video and S-Video inputs are unavailable for use. See “Connecting Video source devices” on page 19 for details. ViewSonic Pro8450w...
Page 24: Operation
Once in stand- by mode, simply press to restart the projector. Disconnect the AC power cord from the electrical outlet and the projector. Do not turn on the projector right after power off. ViewSonic Pro8450w...
Page 25: Adjusting The Projector Height
Adjusting the Projector Zoom and Focus Zoom ring Focus ring Focus the image by rotating the focus ring. A still image is recommended for focusing. Adjust the image size by sliding the zoom ring. ViewSonic Pro8450w...
Page 26: Adjusting Projection Image Size
Keep a space of 30 cm or more between the sides of the projector. Do not use the projector in a smoky environment. Smoke residue may build- up on critical parts and damage the projector or its performance Consult with your dealer for special installation such as suspending from a ceiling. ViewSonic Pro8450w...
Page 27: Locking Control Keys
Creating your own startup screen In addition to selecting the projector preset startup screen from ViewSonic logo or User screen, you can make your own startup screen that is an image projected from your computer or video source.
Page 28: Setting The Presentation Timer
On and press MODE/ENTER. A confirmation message displays. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is On” displaying on the screen. The timer starts counting at the time when the timer is on. ViewSonic Pro8450w...
Page 29 To cancel the timer, perform the following steps: Go to the Setting > Presentation Timer menu and highlight Off. Press MODE/ENTER. A confirmation message displays. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is Off!” displaying on the screen. ViewSonic Pro8450w...
Page 30: Menu Operation
Audio in 1, Audio in 2, Audio in 3 Video Source Audio in 1, Audio in 2, Audio in 3 HDMI Audio in 1, Audio in 2, Audio in 3, HDMI 0 - 10 Microphone Volume 0 - 20 Speaker Volume Mute ViewSonic Pro8450w...
Page 31 Screen Capture Delete Off, CC1, CC2, CC3, CC4, T1, T2 Green Mode On, Off DC 12V On, Off Others -5 - +5 On, Off On, Off Message Function*3 Test Pattern On, Off Quick Power On Quick Cooling On, Off ViewSonic Pro8450w...
Page 32 *3 The selectable Function list includes Brightness, Contrast, Saturation, Color Setting > Color Temperature, Gamma, Overscan, Noise Reduction, Audio Setting, Microphone Volume, Speaker Volume, Mute, Keystone, Aspect Ratio, Projection, Power Saving, ECO Mode, Filter Mode, OSD Position, OSD Transparency, Closed Caption, Message, Zoom, DCR and Test Pattern. ViewSonic Pro8450w...
Page 33: How To Operate
Auto Keystone Automatically correct distorted images resulting from an angled projection. Keystone Manually correct distorted images resulting from an angled projection. When adjusting the Keystone, Auto Keystone will be set at "Off" automatically. ViewSonic Pro8450w...
Page 34 Remove noise around the image. Noise Reduction Reduce temporal and/or spatial noise in the image. Video Setting Allow you to enter the Video Setting menu. Saturation: Adjust a video image from black and white to fully saturated color. ViewSonic Pro8450w...
Page 35 : Automatically detect the input signal type from Computer in 1 and Computer in 2 terminals. : For VGA signal YCbCr/YPbPr:For component signal Power Saving If the input source is not detected and no operation is performed for a specific period of time, projector will automatically turn off. ViewSonic Pro8450w...
Page 36 Screen Capture: Capture the current projection screen as a start up screen. Screen Capture Delete: Delete the captured projection screen. Closed Caption Enable or disable closed captions by selecting CC1 (closed caption1, the most common channel), CC2, CC3, CC4, T1, T2 or OFF. Green Mode ViewSonic Pro8450w...
Page 37 You cannot have two devices with the same IP Address on the same network. The IP Address “0.0.0.0” is prohibited. Subnet Mask: A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. This function can only ViewSonic Pro8450w...
Page 38 (or subnet) in an IP Address. This function can only be used when DHCP is set to No. The Subnet Mask “0.0.0.0” is prohibited. Apply: Save and execute the wireless LAN settings. Information Input Source Display the current input source. ViewSonic Pro8450w...
Page 39 Reset the filter Hour to 0 hours. Lamp Hours Display the lamp’s elapsed operating time (in hours). Lamp Hours Reset Reset the lamp Hour to 0 hours. Factory Default Restore settings to factory default. Language Select the language used by the on-screen menu. ViewSonic Pro8450w...
Page 40: Controlling The Projector Through A Lan Environment
DNS information when the projector is on. If you are in a non-DHCP environment: Repeat steps 1-4 above. Press to highlight DHCP and press to select Off. Contact your ITS administrator for information on the IP Address, Subnet Mask, Default Gateway, and DNS settings. ViewSonic Pro8450w...
Page 41 If you wish to connect to the projector in its standby mode, be sure you have selected RJ45 and obtained the IP Address, Subnet Mask, Default Gateway, and DNS information when the projector is on. ViewSonic Pro8450w...
Page 42: Wireless Connection
Wireless connection ViewSonic wireless dongle To connect to the projector wirelessly, you have to plug a ViewSonic wireless dongle (optional) to the USB Type A connector on the projector, and then only a few OSD configuration steps are required. Make sure the projector is turned on.
Page 43: Controlling The Projector Through A Web Browser
Enter the address of the projector in the address bar of your browser and press Enter. The main page of the ViewSonic webpage control system appears. To change the language for the web pages, click the down arrow to reveal a drop down list and select a desired language.
Page 44 Network Setup: Provides wired and wireless network settings. Presenter Setup: Allows you to change Admin and User passwords for web control. Reset to Default: Allows you to restore the device to the factory default settings. Reboot System: Allows you to reboot the device immediately. ViewSonic Pro8450w...
Page 45 The source list varies according to the connectors available on the projector. When you use the projector control panel or remote control to change the OSD menu settings, it may take a while for the web browser to synchronize these changes with the projector. ViewSonic Pro8450w...
Page 46 To prevent errors, only input the English alphabet and digits on the tools page. After making the adjustments, press the Send button and the data will be saved for the projector. Press Exit to go back to the remote network operation page. ViewSonic Pro8450w...
Page 47 IP Address IP ID Port Projector Projector Name Location Assigned To Network Configuration DHCP (Enabled) (N/A) IP Address Subnet Mask Default Gateway DNS Server User Password Enabled (N/A) New Password Confirm Admin Password Enabled (N/A) New Password Confirm ViewSonic Pro8450w...
Page 48 After pressing the button “Contact IT Help”, the HELP DESK window will appear in the upper right corner of the screen. You will be able to deliver messages to RoomView software administrators/users who connect to the same local area network. For more information, visit http://www.crestron.com & www.crestron.com/getroomview. ViewSonic Pro8450w...
Page 49: Displaying Images Through Pwpresenter
Click the desired projectors in the Search result list, and click Connect directly. You can also type a desired projector name and click Search. iii. You can link to the ViewSonic webpage control system on page ViewSonic Pro8450w...
Page 50 To display a full screen, click FullScreen. To display a partial screen, click FixedSize. A square appears on your screen. You can place it where you want to project. iii. If you wish to change the square, click Alterable. ViewSonic Pro8450w...
Page 51 User can use the mirror driver for presenter capture image, if the system has installed the mirror driver. To allow notification messages to appear, click Yes. Click Apply. The Software Information is available on this page. ViewSonic Pro8450w...
Page 52 To adjust the image quality, click the down arrow to reveal a drop-down list and select a desired quality level. Click Apply. To adjust the capture rate, move the slide bar. The network bandwidth may also affect the performance. iii. Network port setting for fixed or manual type. ViewSonic Pro8450w...
Page 53 Change password allows you to change password for the user type. iii. Disconnect allows you to disconnect the projector from network. Access device via webpage allows you to access ViewSonic webpage con- trol system. View device status displays device setting information and allows you to enter conference control mode.
Page 54 Management allows you to select which computer to be connected and transfer the desktop content to the network projector. Disconnect allows you to disconnect from the projector(s) by clicking the Disconnect icon. Important Be sure to turn off other virtual network control programs before using pwPresenter. ViewSonic Pro8450w...
Page 55: Displaying Pictures With A Usb Storage Device
To Press and hold Menu and then press Enter to display the operation user interface. Use to select the desired item and adjust the settings with . To confirm the selection press Enter. The following buttons are supported in the user interface. Next: Display next page. Previous: Display previous page. ViewSonic Pro8450w...
Page 56 EXIF ON/EXIF OFF: Display the Exif information of the image or not. File Name On/File Name Off: Display the file name or not. The projector supports the following image formats: JPEG (JPG) Bitmap (BMP) Portable Network Graphic (PNG) Graphics Interchange Format (GIF) Tagged Image File Format (TIFF) ViewSonic Pro8450w...
Page 57: Maintenance
Make sure the lens is cool before cleaning. Do not use detergents or chemicals other than those noted above. Do not use benzene or thinners. Do not use chemical sprays. Use a soft cloth or lens paper only. ViewSonic Pro8450w...
Page 58: Replacing The Lamp
Leave the area immediately if the lamp shatters while being operated and ventilate the area for at least 30 minutes in order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to user’s health. ViewSonic Pro8450w...
Page 59 Do not reuse the old lamp. This could cause the lamp to explode. Be sure to turn off the projector and unplug the AC power cord before replacing the lamp. Do not use the projector with the lamp cover removed. ViewSonic Pro8450w...
Page 60: Specifications
AC 100-240 V, 50 - 60 Hz, 3.8A Power consumption 380 W Dimension (W x D x H) 334.6 x 264.5 x 109.5 mm Weight 3.63 kg (8 lb) Note: Design and Specifications are subject to change without prior notice. ViewSonic Pro8450w...
Page 61: Dimensions
Dimensions 334.6 mm (W) x 264.5 mm (D) x 109.5 mm (H) 334.6 64.5 264.5 109.5 84.9 Ceiling mount installation Ceiling mount screws: M4 x 8 (Max. L = 8 mm) Unit: mm ViewSonic Pro8450w...
Page 62: Appendix
The lamp ignition failed. If temperature is too high, the fans will cool the lamp. Lamp LED Solid Temp LED Solid Power LED Blue Flash The cooling process is not complete after the peojector is shut down and re-started right away. Lamp LED Solid Temp LED ViewSonic Pro8450w...
Page 63: Compatibility Modes
1280 x 1024 64.0 60.0 80.0 75.0 1280 x 960 64.7 60.0 75.0 75.0 1280 x 1024 64.0 60.0 80.0 75.0 1440 x 1050 64.7 60.0 1600 x 1200 75.0 60.0 WXGA VESA 1280 x 800 49.7 59.8 60Hz ViewSonic Pro8450w...
Page 64 1920 x 1080 33.8 1080i 1920 x 1080 28.1 720p 1280 x 720 720p 1280 x 720 37.5 576p 720 x 576 31.3 576i 720 x 576 15.6 480p 720 x 480 31.5 480i 720 x 480 15.8 ViewSonic Pro8450w...
Page 65: Troubleshooting
Aim the remote control at the screen or at the front or back of the projector. Move the remote control so it is more directly in front of or behind the projector and not as far to the side. ViewSonic Pro8450w...
Page 66 BE,EF,02,06,00,57,D0,2E,00,00,00,00,00 OTHER FUNCTION DCR ON BE,EF,02,06,00,D3,D1,2A,00,00,00,00,00 DCR OFF BE,EF,02,06,00,02,D0,2B,00,00,00,00,00 ECO ON BE,EF,03,06,00,EF,DB,6A,00,00,00,00,00 ECO OFF BE,EF,03,06,00,3E,DA,6B,00,00,00,00,00 VOLUME INC BE,EF,02,06,00,F1,DE,68,00,00,00,00,00 VOLUME DEC BE,EF,02,06,00,20,DF,69,00,00,00,00,00 KEYSTONE INC BE,EF,03,06,00,10,DB,65,00,00,00,00,00 KEYSTONE DEC BE,EF,03,06,00,23,DB,66,00,00,00,00,00 LAMP HOURS RESET BE,EF,02,06,00,D3,43,3A,00,00,00,00,00 FILTER HOURS RESET BE,EF,02,06,00,D2,92,3B,00,00,00,00,00 FACTORY RESET BE,EF,03,06,00,6B,DA,6E,00,00,00,00,00 ViewSonic Pro8450w...
Page 67 FIRMWARE VERSION BE,EF,03,06,00,D5,D9,70,00,00,00,00,00 D-Sub 9 pin Wire List 1 CD COLOR Black Brown Orange Yellow Green Blue Purple White SHELL SHELL ViewSonic Pro8450w...
Page 68: Ir Control Code
IR Control Code System Code: 83F4 Format : NEC ViewSonic Pro8450w...
Page 69: Customer Support
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ T= 0800-54565 soporte@viewsonic.com...
Page 70: Limited Warranty
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Page 71 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
Page 72: Mexico Limited Warranty
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
Page 73 ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea Canyon Road, Walnut, CA. 91789 USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico Fax: 1-800-685-7276 E-Mail: http://www.viewsonic.com 4.3: ViewSonic Mexico Limited Warranty PRJ_LW03 Rev. 1A 06-25-07 ViewSonic Pro8450w...

This manual is also suitable for:

Vs13646

ViewSonic Pro8450w User Manual

Introduction

Using the Product

Connection

Operation

Maintenance

Specifications

Appendix

Quick Links

Related Manuals for ViewSonic Pro8450w

Summary of Contents for ViewSonic Pro8450w

This manual is also suitable for:

Table of Contents