The Crestron (eControl) page displays the Crestron eControl user interface. The
eControl page provides a variety of virtual keys to control the projector or adjust
the projected pictures.
You can press
These buttons function the same as the ones on the OSD menus or remote
To switch between input signals, click on your desired signal.
To change the language for the Crestron page, click the down arrow to
reveal a drop down list and select a desired language.
The Menu button can also be used to go back to previous OSD menus, exit
and save menu settings.
The source list varies according to the connectors available on the projector.
When you use the projector control panel or remote control to change the
OSD menu settings, it may take a while for the web browser to synchronize
these changes with the projector.