Advertisement
STEP 4:
Slip in the Top Rack (1) and slip-in the Taper
Ring M6 (7) 4 off , and Screw M6 x 25 (6) 4 off,
and Bush M6 18x10 (3) 4 off through the
Mounting holes in the Top Rack and, tighten it
to the torque .
Copyright By SRC
Design and Specification are subjected to change
2
Rear Rack as shown "Final Assembled condition"
STEP 3:
Orient and align the Bottom Plat (2) in-line
with the Panel mounting holes, and bring the
panels exactly in-line with them, and slip-in
the Mounting The Screw M8x35 (8) 2 off and
The Screw M8x50 (9) 2 off and The Washer
M8 (10) 4 off on each side and secure the
threads.
Page 4
Advertisement
