Filling The Solution Tank - Kärcher Armada BRC 45/38 120V Manual

Operations

Filling The Solution Tank

Do not put defoamer or solvent chemicals in the
solution tank.
Do not allow water to spill into vacuum motor inlet.
Dry spills from top of solution tank.
Do not tip machine on back when full as water may
spill from machine.
Use only the suitable chemicals listed below. Using
incompatible chemicals will damage the machine.
Damages of this type are not covered under warranty.
Carefully read ingredients on manufacturer's label
before using any product in this machine.
Chemicals
Suitable Chemicals
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
*Product Trademark Names
26
Non-Compatible
Chemicals
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride
Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
FILL LINE
FILL CAP
8.645-280.0 Manual Operator Armada BRC 45-38
STEP 2
ADD WATER
10 Gal. MAX
(37.8 Lt)
OR
ADD CLEANING
CHEMICAL PER
CHEMICAL LABELING
REPLACE SOLUTION
FILL COVER
REMOVE
SOLUTION
FILL COVER
STEP 1
STEP 3
STEP 4