Pre Run Setup - Kärcher Armada BRC 45/38 120V Manual

Pre Run Setup

1. Install the vacuum shoe and brush. Fill solution
tank with water and chemical. (see Filling the
Solution Tank instructions).
2. To adjust handle to comfortable operating position,
loosen knob, slide to comfortable height and
tighten.
3. Plug cord into grounded outlet. Place the power
extension cord in its holder on the machine by
wrapping it through the Cord Holder and plugging it
into the pigtail of the machine.
8.645-280.0 Manual Operator Armada BRC 45-38
Operations
STEP 1
STEP 2
STEP 3
25