Scpi Commands For System-Related Tasks - Agilent Technologies U2751A User's And Service Manual

2 Operation and Features

SCPI Commands for System-Related Tasks

26
The following examples show the SCPI commands for
performing certain system-related tasks.
Example 4, Performing system-related tasks
-> *CLS; *RST
-> *TST?
<- +0
-> SYST:ERR?
<- +0, "No Error"
// Resets the switch to the
default power-on state.
This command can be
ignored if this operation is
not required.
// Executes the self-test.
// Returns a +0 if the test
pass else it will return a
+1 if it fails.
// Returns the error number
and its corresponding
message string from the
error queue.
U2751A User's and Service Guide