Cleaning And Care - Vitek VT-1336 Manual Instruction

•
Hang the unit using the loop (8).
•
Divide your hair into sections no wider than 4-5 cm.
•
Wait for the working plates (2) to reach the set temperature.
•
Place a strand of hair between the plates (2) and squeeze
them. During operation hold the device by the handle only,
do not touch the straightener body, the body edges and
the heating plates (2).
•
Hold the straightener for several seconds and slide it
throughout the hair length, slightly pressing the plates
together.
•
Repeat the procedure until you finish straightening your hair.
•
After finishing the hair straightening procedure, switch the
unit off by pressing and holding down the ON/OFF button
(5) « » for 2-3 seconds, the temperature indication on
the display (1) will go out.
•
Remove the power plug (7) from the mains socket.
•
Let the hair straightener cool down completely.
•
Squeeze the plates (2) together and secure them by mov-
ing the lock (6) «inward» towards the display.

CLEANING AND CARE

•
Before cleaning, unplug the unit, hang it on the loop (8)
and let it cool down completely.
•
Do not immerse the body, the power cord and the power
plug of the unit into water or other liquids.
•
Wipe the outer surface of the body and the heating plates
(2) with a soft damp cloth.
•
Do not use abrasives and solvents to clean the unit.
STORAGE
•
Let the unit cool down completely and make sure that the
unit body is clean and dry before taking it away.
•
Squeeze the plates (2) together and secure them by mov-
ing the lock (6) «inward» towards the display.
•
Never wind the power cord (7) around the unit, as it can
damage the cord.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
DELIVERY SET
Hair straightener – 1 pc.
Instruction manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 110-240 V ~ 50-60 Hz
Rated input power: 54 W
ENGLISH
15