Parts Description; Speakers; Counters; Buttons - LAI Games SNAPSHOT 2 BOOTH Operator's Manual

PARTS DESCRIPTION

SPEAKERS

4 speakers are used for system sounds. Left audio channel is used for the 2 outside speakers and the
right is used for the 2 inside speakers.

COUNTERS

Counters will increment for each coin input and each photo printed. All counters are under software
control. COIN1/COIN2 counters are triggered by the coin mechanism inputs. PRINT OUT counter is
triggered every time the print sensor is triggered.

BUTTONS

Press the green SERVICE/BACK button to issue a service credit from attract mode.
Press the red TEST/ENTER button to enter the operator menu from attract mode.
When in the operator menu, use all four buttons to navigate through the menu.

VOLUME KNOB

Use to adjust the speaker's sound level.

POWER INLET/MAINS SWITCH

The power inlet is a standard IEC inlet socket with mains power switch, located at the rear of the
machine. There is a main power fuse internal in this IEC socket. The fuse should be a M205, 250VAC,
3A.
* WARNING! *
ALWAYS turn OFF mains power and unplug the game before replacing any fuses, and
ALWAYS use the correct rated fuse.

POWER SUPPLY

The power supply is located at the back of the cabinet, and is accessed via the rear service panel of
the machine. It is a SP-320-12 12V 25A Universal AC input switching power supply. It can handle AC
input from 100-240VAC at 50/60Hz. An adjustment screw is available for fine-tuning the output
voltage.
Page | 33