Vitek VT-1360 Manual Instruction page 16

ENGLISH
– touch hot objects and surfaces,
– be immersed into water,
– run over sharp edges of furniture,
– be used as a handle for carrying the unit.
•
The hair clipper is not intended for professional use.
•
Use the unit to cut only natural human hair, hair should
be dry.
•
Do not use the unit to cut artificial hair and animal hair.
•
Use only the attachments supplied.
ATTENTION! Do not immerse the hair clipper, the power
adapter cord and the power adapter itself into water or
any other liquids. Do not wash the clipper blades under
water jet.
•
Do not touch the hair clipper body and the power adapt-
er with wet hands.
•
Do not use the unit outdoors.
•
Do not use the unit in places with high temperature and
relative humidity more than 80%.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Do not keep the unit near a bath or a sink filled with
water.
•
If the unit is dropped into water, unplug power supply
immediately, and only then take it out of the water.
•
Never use the unit if the attachment combs are broken
or damaged or if the blades are damaged.
•
After each use clean the attachments and the blades
with the brush to remove the cut-off hair.
•
Keep the blades clean and lubricated.
•
Never leave the operating unit unattended.
•
Switch the hair clipper off during intervals in operation
or when you are not using it.
•
Do not leave children unattended to avoid them using
the unit as a toy.
•
Do not allow children to touch the hair clipper body
the power cord and the power adapter during the unit
operation.
•
During the unit operation and between the operation
cycles, place the unit out of reach of children and peo-
ple with disabilities.
•
This unit is not intended for usage by children.
•
The unit is not intended to be used by persons (includ-
ing children) with any physical, sensory or mental
16