Specifications - Sharp InGlass PN-LA862 Operation Manual

nProduct Specifications
Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Brightness (typical)
Contrast ratio (typical)
Viewing angle
Screen active area
Computer input signal
Plug and play
Input terminals
Output terminals
USB port
LAN terminal
Speaker output
Touch Panel
Option board slot
Power requirement
Operating temperature *
Operating humidity *
Storage temperature
Storage humidity
Power consumption *
(Max / input signal waiting state *
mode * / off mode)
6
Dimensions
(excluding protrusions)
Weight
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness. This is the brightness of the LCD panel.
Brightness of product: 450 cd/m
*2 When using the monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward from the perpendicular in relation
to a level surface), use the monitor at the ambient temperature between 41°F (5°C) and 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*4 Factory setting. (When no optional part is attached.)
*5 When "CONNECT AUTO INPUT SELECT" and "NO SIGNAL AUTO INPUT SEL." are set to "OFF".
*6 When "POWER SAVE MODE" is set to "ON". When "POWER SAVE MODE" is set to "OFF": 1.0 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
48
E

Specifications

PN-LA862
86" Class [85-9/16 inch
(217.4 cm) diagonal] TFT
LCD
(pixels) 3840 x 2160
Approx. 1.07 billion colors
0.494 mm (H) ×
0.494 mm (V)
500 cd/m
1200: 1
178° right/left/up/down (contrast ratio ≥ 10)
inch (mm) 74-5/8 (W) x 41-15/16 (H)
(1895.04 x 1065.96)
HDMI, DisplayPort
VESA DDC2B
Video HDMI x 2
DisplayPort x 1
USB Type-C x 1
Video DisplayPort x 1
Audio 3.5 mm mini stereo jack x 1
USB 2.0 compliant x 1, USB 3.0 compliant x 3
10 BASE-T/100 BASE-TX
10 W + 10 W
Detection method InGlass (Infrared blocking detection method)
Computer connector USB (3.0 compliant) (Type B) x 1
12 V, 5.5 A
(power supplied when expanding the functions with an optional part)
AC 100 V - 240 V,
4.9 A - 1.9 A, 50/60 Hz
* 41°F to 95°F (5°C to 35°C)
2 3
20% to 80% (no condensation)
3
-4°F to 140°F (-20°C to 60°C)
10% to 80% (no condensation)
275 W (440 W)
4
/ standby (440 W/2.0 W/0.5 W/0.0 W)
5
inch (mm) Approx. 77-3/8 (W) x
3-3/8 (D) x 45-13/16 (H)
(1965.4 x 86.5 x 1163.9)
lbs. (kg) Approx. 157.7 (71.5)
2 (PN-LA862, PN-LA752), 400 cd/m
PN-LA752
75" Class [74-1/2 inch
(189.3 cm) diagonal] TFT
LCD
0.430 mm (H) ×
0.430 mm (V)
2 1
*
64-15/16 (W) x 36-9/16
(H) (1649.66 x 927.94)
AC 100 V - 240 V,
4.1 A - 1.6 A, 50/60 Hz
205 W (360 W)
(360 W/2.0 W/0.5 W/0.0 W)
Approx. 67-3/4 (W) x
3-3/8 (D) x 40-3/8 (H)
(1720.1 x 86.5 x 1025.9)
Approx. 124.6 (56.5)
2 (PN-LA652)
PN-LA652
65" Class [64-1/2 inch
(163.9 cm) diagonal] TFT
LCD
0.372 mm (H) ×
0.372 mm (V)
450 cd/m 2 1
*
56-1/4 (W) x 31-5/8 (H)
(1428.48 x 803.52)
AC 100 V - 240 V,
3.9 A - 1.5 A, 50/60 Hz
190 W (350 W)
(350 W/2.0 W/0.5 W/0.0 W)
Approx. 58-13/16 (W) x
3-9/16 (D) x 35-1/4 (H)
(1493.5 x 90.7 x 896.1)
Approx. 108.1 (49)