Download Print this page

Sharp PN-L601B Driver Manual

Touch panel driver operation manual
Hide thumbs Also See for PN-L601B:





Summary of Contents for Sharp PN-L601B

  • Page 2: Table Of Contents

    • Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not permitted. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
  • Page 3: Setting Up The Pc

    • If the touch panel driver is not running, it can be started by double-clicking “SH_TPdrv.exe” in the folder where the touch panel driver is installed. The touch panel driver is normally installed in the following folder: C:\Program Files\SHARP\SH_TPdrv (when the PC’s startup drive is the C drive) Setting up the PC...
  • Page 4: Touch Panel Settings

    Touch panel settings are configured in the touch panel driver. The touch panel driver starts automatically and the icon ( Caution • When using the touch panel, set the “SIZE” of the monitor to “WIDE”, “NORMAL”, or “Dot by Dot”. The touch panel cannot be used when the “SIZE”...
  • Page 5: Calibration

    Touch Panel Settings Calibration Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched. nCalibration Method Simple Select the currently displayed screen size (“WIDE”, “NORMAL”, “Dot by Dot”), and calibration takes place automatically. Calibrate using advanced calibration if the mouse cursor is out of position when the touch pen is used.
  • Page 6: Properties

    Touch Panel Settings Properties Settings for the touch pen can be configured in the properties. Select a tab to change a setting on that tab. nDOUBLE CLICK RANGE SETTING Set how much the position can shift between the first touch and the second touch and still be recognized as a double-click. Set the range based on how you use the touch pen.
  • Page 7 nOPERATION SETTING Function Button 1 Set the function that activates when function button 1 is pressed with the touch pen. • RightClick : Functions as a right click. • Disable : Disables function button 1. Function Button 2 Set the function that activates when function button 2 is pressed with the touch pen. •...
  • Page 8: Uninstalling The Driver Software

    Uninstalling the Driver Software Caution • This can only be done by a user with administrator authority. 1. Click the touch panel driver icon ( If a confirmation window appears, click “Yes”. 2. Disconnect the USB cable. 3. Select “Control Panel” from the “Start” menu. 4.
  • Page 9 PN-L601B D EN 10H(1)