Table of Contents
Advertisement
nSECURITY-PORT SETTING
This screen allows you to configure the SERVER PORT
setting.
SEVER PORT
Enables or disables the services (port numbers) to which the
product can be accessed.
When both "HTTP" and "HTTPS" are disabled in "SEVER
PORT", access/setting via the web is no longer possible. To
enable them again, perform ALL RESET using the remote
control of the unit.
nSECURITY-CERTIFICATE
This screen allows you to configure the HTTP SERVER and
HTTP CLIENT.
HTTP SERVER
When the product is shipped, the HTTP server uses a
dummy server certificate and a security warning is issued.
The certificate can be installed when the user has obtained
the certificate. The format is a PKCS#12 (pfx extension) file.
HTTP CLIENT
Install a CA certificate when a CA server certificate is used
for the internet connection environment. The format is PEM
format (pem extension).
Controlling the Monitor with a computer (LAN)
nFIRMWARE UPDATE
Firmware can be updated via the WEBbrowser.
The latest FIRMWARE can be obtained by downloading it
from the Information Display Downloader. (See page 10.)
AUTO UPDATE
Set to perform updates at specified times via the Internet.
When set to "ON", the monitor will be updated if new
firmware is detected.
When set to "ONLY CHECK", new firmware is detected and
the new firmware is displayed in "MANUAL UPDATE", but no
update is performed.
MANUAL UPDATE
Connect to the internet, check for the presence of an
updateable firmware, and perform the update when the
update is present.
FILE UPLOAD & UPDATE
Upload the file for the firmware update and perform the
update.
LATEST UPDATED
Displays the date and version of the last update.
UPDATE HISTORY
Displays the success/failure and date of the last three
network updates.
45
E
Advertisement
Table of Contents
