Specifications; Mounting A Web Camera - Sharp InGlass PN-LA862 Setup Manual

Model
Power requirement
1
Operating temperature *
Operating humidity
Storage temperature
Storage humidity
2
Power consumption * (Max)
Dimensions inch (mm)
(excluding protrusions)
Weight lbs. (kg) Approx. 157.7 (71.5)
*1 When using the monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward from the perpendicular in relation
to a level surface), use the monitor at the ambient temperature between 41°F (5°C) and 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*2 Factory setting. (When no optional part is attached.)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
1
3
Camera mount

Specifications

PN-LA862
AC 100 V - 240 V,
4.9 A-1.9 A, 50/60 Hz
41°F to 95°F (5°C to 35°C)
20% to 80% (no condensation)
-4°F to 140°F (-20°C to 60°C)
10% to 80% (no condensation)
275 W (440 W)
Approx. 77-3/8 (W) x
3-3/8 (D) x 45-13/16 (H)
(1965.4 x 86.5 x 1163.9)

Mounting a web camera

It is possible to mount the PN-ZCMS1 Video-Conferencing
Soundbar (optional) or a commercially available web camera
(1.1 kg (2.4 lbs.) or less) with the camera mount (small)
(supplied).
Camera mount (small)
1. Remove the screws from this monitor.
2
2. PN-LA862/PN-LA752 :
3. Attach the PN-ZCMS1 (optional) on the camera mount
Camera mount (large)
2
It is possible to mount the our recommended web camera with
the camera mount (large) (supplied). Contact your dealer for
our recommended web camera.
1. Remove the screws from this monitor.
2. PN-LA862/PN-LA752 :
• For mounting instructions of web camera (optional), refer to
PN-LA752 PN-LA652
AC 100 V - 240 V, AC 100 V - 240 V,
4.1 A-1.6 A, 50/60 Hz 3.9 A-1.5 A, 50/60 Hz
205 W (360 W) 190 W (350 W)
Approx. 67-3/4 (W) x Approx. 58-13/16 (W) x
3-3/8 (D) x 40-3/8 (H) 3-9/16 (D) x 35-1/4 (H)
(1720.1 x 86.5 x 1025.9) (1493.5 x 90.7 x 896.1)
Approx. 124.6 (56.5) Approx. 108.1 (49)
Attach the camera mount (small) (supplied) with the
camera mount screws (M3x12) (x2) (supplied).
PN-LA652 :
Attach the camera mount (small) (supplied) with the
camera mount screws (M3x8) (x2) (supplied).
The camera mount screws are different depending on the
monitor.
with the camera screw (inch thread) (x1) (supplied).
Attach the camera mount (large) (supplied) with the
camera mount screws (M3x12) (x2) (supplied).
PN-LA652 :
Attach the camera mount (large) (supplied) with the
camera mount screws (M3x8) (x2) (supplied).
The camera mount screws are different depending on the
monitor.
TIPS
the instruction manual for the web camera.
9
E