Sharp InGlass PN-LA862 Operation Manual page 8

MOUNTING PRECAUTIONS (Continued)
• Use the cover SHARP logo when you install the monitor in
portrait orientation.
Flat installation
• When using the monitor laying flat on a surface (when
the monitor is tilted more than 20 degrees upward from
the perpendicular in relation to a level surface), consult
an authorized dealer because there are some specific
mounting conditions.
Adhere to the following. Failing to adhere to the following
may cause malfunctions.
- Set "HORIZONTAL INSTALLATION" in the ADMIN menu
to "FACE UP". (See page 32.)
- Use this monitor at the ambient temperature between 41°F
(5°C) and 86°F (30°C). Provide 7-7/8 inch (200 mm) or more
space between the monitor and the floor or other mounting
surfaces and surrounding objects to prevent heat from
accumulating inside. If it is difficult to provide sufficient space
or if the ambient temperature may be outside of the range of
41°F (5°C) to 86°F (30°C), install a fan or take other measures
to keep the ambient temperature within the required range.
7-7/8
[200]
- Do not press hard on the LCD panel or otherwise subject
it to impacts.
8
E
Cover SHARP logo
7-7/8 [200]
Unit: inch [mm]
7-7/8
[200]
7-7/8
[200]
7-7/8 [200]