Table of Contents
Advertisement
CONFIGURE QUAD-SCREEN
QUAD-SCREEN MODE
Set how the screens are displayed.
OFF ........... Display single screen.
ON ............. Display 4 screens simultaneously.
SETTING INITIAL SCREEN
Set the input mode displayed in each of the 4 screens.
When "AUTO" is selected, input modes that have input signals are displayed in the order set in "PRIORITY: AUTO INPUT
SEL.".
PRIORITY: AUTO INPUT SEL.
Set the order of priority for the input mode that is displayed when "AUTO" is selected for "SETTING INITIAL SCREEN".
The lower the number, the higher the priority.
SAVE LAST INPUT CONFIG.
OFF ........... When quad-screen display is started, the 4 screens set in "SETTING INITIAL SCREEN" always appear.
ON ............. When quad-screen display is started, the previously displayed 4 screens appear.
TARGET: SOUND / INPUT SEL.
When quad-screen is displayed, you set the screen whose audio is output, and the screen whose input is changed.
When you return to single screen display, the input mode will return to the input mode set here.
RECONFIGURE QUAD-SCREEN
Displays 4 screens again according to "SETTING INITIAL SCREEN" setting.
This can be set when "QUAD-SCREEN MODE" is set to "ON".
INPUT SIGNAL INFO.
This shows the input mode, resolution, and frequency of the displayed screens.
nTOUCH PANEL
TOUCH INPUT SELECT
Set the terminal that connects the computer and touch panel in each input mode.
When "-" is selected, the touch panel cannot be used.
TOUCH OUTPUT INVALID DISP.
TOUCH OUTPUT INVALID ICON ......... When "TOUCH OUTPUT INVALID ICON" is set to "ON" and touch action is disabled, the
CHANGE DISPLAY POSITION ............. Sets the display position of the TOUCH OUTPUT INVALID icon.
TOUCH OPERATION MODE
Select the touch mode.
The touch panel must be connected in order to configure this setting.
When "AUTO" is selected, automatically switches between "TOUCH SCREEN MODE" and "MOUSE MODE" according to
operating system.
TOUCH PANEL MODE
When the Vsync of the input signal is 60 Hz, setting this to "ON" improves touch panel tracking.
When two screens are displayed, the screen may become distorted.
Some input signals may also cause screen distortion.
If the screen becomes distorted, set to "OFF".
TOUCH OPERATION
Use this setting to enable or disable touch action.
When the input mode is changed, "TOUCH OPEATION" is canceled.
TIPS
• The position of the TOUCH OUTPUT INVALID icon can be changed.
• The TOUCH OUTPUT INVALID icon appears even when a USB cable is not connected.
• In quad-screen display or when a color pattern is displayed,the TOUCH OUTPUT INVALID icon does not appear.
TOUCH OUTPUT INVALID icon appears in the screen.
You can touch the TOUCH OUTPUT INVALID icon in the screen to enable touch action.
Menu Items
31
E
Advertisement
Table of Contents
