Download Print this page

Safety Instructions - Elwa HOTRUN X24 Installation & User Manual

Electric instantaneous water heater

Advertisement

1. For continued safety of this water heater, it must be installed, operated and
maintained in accordance with the manufacturer's instructions.
2. This water heater may deliver water at a high temperature. Refer to the
plumbing code of Australia (PCA) and/or any further local requirements and
installation instructions to determine if additional delivery temperature control
is required.
3. When positioning the water heater, ensure that the electrical supply cord is not
trapped or damaged. If the electrical supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly qualified persons
authorised by Elwa to avoid a hazard.
4. This water heater is not intended for use by person/s (including children) with
reduced physical, sensory, intellectual capabilities or lack of experience and
knowledge unless the person/s –
• are given specific instructions how to safely operate the water heater.
• are directly supervised concerning the safe operation of water heater.
• are made aware of the hazards involved in the use of the water heater.
by a person responsible for their safety.
5. Shower heads and aerators in tapware must be descaled regularly.
6. DO NOT SWITCH ON, if there is a possibility the water inside the water heater
is frozen.
7. To avoid a hazard due to inadvertent resetting of the thermal cut-out, the
power supply to this water heater must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off.
Please read and follow the installation and operation instructions carefully, to
ensure long life and reliable operation of this HOTRUN water heater.
This water heater must be installed by a licensed plumber and electrician.
Not doing so will void all warranties.
Under no circumstances should you attempt to install, repair, or disassemble
the HOTRUN water heater Hotrun without first isolating POWER to the water
heater at the circuit breaker and lock-out & tag that circuit. Warranty is void if
not installed according to all instructions in this manual.

Safety Instructions

Attention!
- 2 -

Advertisement

loading