Advertisement
Fig 5-A:
Concealed installation
Use the 2 supplied stainless steel flexible hoses.
Internally to connect the hot & cold-water pipes
coming out from the wall
Fig 5-B:
Surface installation
Electrical connections
1. Before starting the electrical installation, ensure that the power supply is isolated,
locked out & tagged to avoid any danger of electric shock.
2. Mounting and plumbing must be completed before proceeding with electrical
connections.
3. All electrical work must comply with national & local electrical standards.
4. Water heater must be connected to a secure earth & dedicated electrical circuit
supplying the correct voltage & current rating.
5.Terminate the power cable wires securely to the terminal block and circuit breaker.
Fig 6:
Put front cover back onto the heater
- 7 -
Advertisement
