Advertisement
General Installation
The installation must be compliant with the local electrical and plumbing
standards.
1. Please make sure the main power supply circuit breaker, water pressure, earth
connection, cable & wire size meet the installation requirements.
2. The water heater MUST always be connected to an uninterrupted solid earth
connection directly from to the main earth connection in the switchboard.
3. This water heater MUST be connected to a dedicated electrical circuit breaker.
4. DO NOT install this water heater near an open fire or a strong magnetic field.
This model water heater can only be mounted in a vertical position.
Opening the casing
Choose an appropriate location to install the water heater.
Fig
1: Front and back of the water heater
Fig
2: To open the front cover of the casing – press the small cover at the
bottom-centre downwards and open to access the screw to release the cover.
Guidelines.
- 4 -
Advertisement
