Operation; Switching The Device On And Off - Fujitsu P24W-6 LED Operating Manual

Operation

Operation

Switching the device on and off

1 = Switch On/Off
2 = Power supply indicator
The colour of the LED indicator changes as follows:
LED indicator
blue
green
orange
does not light up
The switch setting "0" of the 0 W switch (3) on the reverse side activates the
ECO power- saving mode (0 W operating mode) and the switch setting "I"
switches to the BASIC power saving mode <1 W. This setting is required for the
DP data cable. In some PCs, it can, however, also be necessary for VGA or
DVI if the screen remains unlit in the 0 W operating mode.
► Switch the device on again with the ON/OFF switch (1).
18
Status
Monitor and computer are switched on (normal mode).
Monitor and computer are switched on (ECO mode).
Monitor is not receiving a video signal or is in power saving mode.
Monitor is switched off (or is in 0W power-saving mode).
3 = 0 W switch
Fujitsu Technology Solutions