Installing The Chute - Toro 79336 Operator's Manual

2. Lift the bagger top and install the bags by sliding
the bag frame hooks onto the retaining brackets
(Figure 17).
4
3
G005672
Figure 17
1. Bag
2. Bagger frame
3. Lower the bagger top onto the bag (Figure 18).
Figure 18
4. Install the upper bagger tube. Insert the curved end
into the opening in the bagger top. Make sure the
flared end with the retention post is pointing down and
froward in preparation to be mated with the Finishing
Kit.
1
2
3. Retaining bracket
4. Bag frame hook
G005757
5

Installing the Chute

Parts needed for this procedure:
1 Chute
2 Knobs
1 Baffle
2 Carriage bolt (5/16 x 1-3/8 inches)
2 Flange nut (5/16 inch)
2 Flat washers (5/16 inch)
Procedure
1. Remove the plate assembly that includes the side
discharge chute (Figure 19). Save this hardware and
assembly.
2. Remove the existing baffle under the right side of the
mower deck (Figure 19). Save the baffle and hardware.
3
4
3
1. Flange nuts
2. Plate assembly with
discharge chute
11
1
2
g017826
Figure 19
3. Carriage bolts
4. Existing baffle