6
Installing the Blowout Baffle
No Parts Required
Procedure
Note: This procedure is only for machines with 54 inch
mower decks.
Secure the blowout baffle to the mower deck using 2 carriage
bolts and 2 lock nuts
(Figure
Figure 24
1. Lock nuts
2. Blowout baffle
24).
3. Bolts
7
Installing the Chute
Parts needed for this procedure:
1
Chute
Procedure
1. Angle the metal tab at the front of the chute into the
slot in the bracket welded to the mower deck
25).
1
1. Chute
2. Metal tab
2. Pivot the chute back and toward the deck so chute is
flush with the mower deck
13
3
2
G015203
Figure 25
3. Bracket
(Figure
26).
(Figure