Safety - Dometic i7800 Installation Manual

1.0 SAFETY INFORMATION
WARNING
Before installation
During Installation
After Installation
THE SAFETY INFORMATION PROVIDED HERE IS INTENDED TO
INFORM YOU OF THE DANGERS THAT MAY BE PRESENT BEFORE,
DURING, AND AFTER INSTALLATION. IT IS CRITICAL THAT YOU
READ AND UNDERSTAND THIS INFORMATION.
Safe operation of the shift and throttle system depends upon proper
installation and maintenance of the system, and the common sense,
safe judgment, knowledge, and expertise of the operator. Every
installer and operator of the i7X00 system should know the following
requirements before installing or operating the system. If you have
any questions regarding any of these warnings, contact Dometic.
1. Read and understand all installation and user's manuals provided
with the i7X00 components.
2. Ensure that all components required to complete the installation
are on hand (including cables, harnesses, and the proper tools).
3. SeaStar and i7X00 components are highly engineered and safety
tested to ensure system integrity. DO NOT substitute any component.
Substitution with non-SeaStar or non-i7X00 components may
compromise system safety, performance, and reliability.
1. Install system components as directed in this manual. Some
component parts and kits may be supplied with additional
installation instructions—refer also to these instructions.
2. SeaStar and i7X00 components are highly engineered and safety
tested to ensure system integrity. DO NOT substitute any component.
Substitution with non-SeaStar or non-i7X00 components may
compromise system safety, performance, and reliability.
3. If an instruction is unclear, contradictory, or you are otherwise
uncertain how to proceed, do not guess. Call Dometic technical
support.
1. Check that there is no interference between the control head
levers and the steering wheel or any other dash-mounted
components.
2. Operate the trim/tilt switch on the control head lever and verify that
the engines tilt in the expected direction.
3. Check that the mechanical cable bends are smooth and have an
appropriate minimum radius.
1-1