Appendix A Mounting Templates; Control Head - Dual Lever - Dometic i7800 Installation Manual

APPENDIX A MOUNTING TEMPLATES

NOTICE
A.1 Control Head – Dual Lever
If you must photocopy this mounting template for use, check ALL
measurements using a measuring device prior to using as a template.
SCALE = 1:1.
1.5"
(38 mm)
1.71"
(43.5 mm)
FRONT
Figure A-1. Control head – Dual lever mounting template.
4 x 1/4"
1.5"
(6.35 mm)
DIA.
(38 mm)
3" (76 mm) DIA.
1.71"
(43.5 mm)
A-1