Table of Contents
Advertisement
WARNING
TIP: Once you've tightened the
nuts on the tees, mark them with
a permanent marker as shown in
figure 3-6. This makes it easy to
inspect them for tightness later.
CAUTION
3-8
FAILURE TO SECURE HARNESS MAY RESULT IN HARNESS WEAR,
CAUSING LOSS OF THROTTLE CONTROL, PROPERTY DAMAGE,
PERSONAL INJURY AND/OR DEATH.
ALL NUTS DOUBLE
CHECKED FOR TIGHTNESS
AND MARKED
EACH CABLE
APPROPRIATELY
SECURED AND
STRAIN RELIEVED
CLOSE TO TEES
NO PULLING
ON TEES
Figure 3-6. Correct CAN2 tee installation example.
Do not connect anything other than SeaStar components to the
CAN2 network.
CM20064
SCREWS IN ALL
MOUNT HOLES
Figure 3-7. Alternative CAN2 6-port hub connection (available separately).
SCREWS IN ALL
MOUNT HOLES
NOTE: TEES MAY NOT LOOK
EXACTLY AS SHOWN
Advertisement
Table of Contents
