MSI MS-C903 User Manual page 54

▶ Console Redirection Settings (COM1)
» Terminal Type
To operate the system's console redirection, you need a terminal supporting ANSI
terminal protocol and a RS-232 null modem cable connected between the host
system and terminal(s). You can select emulation for the terminal from this setting.
[ANSI]
[VT100]
[VT100Plus]
[VT-UTF8]
» Bits per second, Data Bits, Parity, Stop Bits
These setting specifies the transfer rate (bits per second, data bits, parity, stop bits)
of Console Redirection.
» Flow Control
Flow control is the process of managing the rate of data transmission between
two nodes. It's the process of adjusting the flow of data from one device to another
to ensure that the receiving device can handle all of the incoming data. This is
particularly important where the sending device is capable of sending data much
faster than the receiving device can receive it.
» VT-UTF8 Combo Key Support
This setting enables/disables the VT-UTF8 combination key support for ANSI/VT100
terminals.
» Recorder Mode, Resolution 100x31
These settings enable/disable the recorder mode and the resolution 100x31.
» Putty Keypad
PuTTY is a terminal emulator for Windows. This setting controls the numeric
keypad for use in PuTTY.
54
Security
Extended ASCII character set.
ASCII character set.
Extends VT100 to support color, function keys, etc.
Uses UTF8 encoding to map Unicode characters onto one or
more bytes.