Power - MSI MS-C903 User Manual

Power

▶ Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶ Deep Sleep Mode
The setting enables/disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power, at a
minimum, to the power button to allow return to S0. A full reboot is required.
No previous content is retained. Other components may remain powered so the
computer can "wake" on input from the keyboard, clock, modem, LAN, or USB device.
▶ OnChip USB
The item allows the activity of the OnChip USB device to wake up the system from
S4/ S5 sleep state.
▶ PCIE PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE PME is detected.
▶ RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power failure or
interrupt occurred.
** Advanced Resume Events Control **
57
Power