MSI MS-C903 User Manual page 40

▶ Super IO Configuration
▶ Serial Port 1/ 2/ 3/ 4
This setting enables/disables the specified serial port.
» Change Settings
This setting is used to change the address & IRQ settings of the specified serial
port.
» Mode Select
Select an operation mode for Serial Port 1/ 2/ 3/ 4.
▶ FIFO Mode
This setting controls the FIFO data transfer mode.
▶ Shared IRQ Mode
This setting provides the system with the ability to share interrupts among its
serial ports.
▶ Watch Dog Timer
You can enable the system watchdog timer, a hardware timer that generates a
reset when the software that it monitors does not respond as expected each time
the watchdog polls it.
40
Advanced