MSI MS-C903 User Manual page 48

» HECI Message Check Disable
This setting disables message check for BIOS boot path when sending messages.
» MBP HOB Skip
Setting this option will skip MBP HOB.
» HECI2 Interface Communication
This setting Adds/ Removes HECI2 device from PCI space.
» KT Device
This setting enables/ disables KT Device.
» End of Post Message
This setting enables/ disables End of Post Message sent to ME.
» DOI3 Setting for HECI Disable
Setting this option disables setting DOI3 bit for all HECI devices.
» MCTP Broadcast Cycle
This setting enables/ disables Management Component Transport Protocol (MCTP)
Broadcast Cycle.
▶ Anti-Rollback SVN Configuration
» Automatic HW-Enforced Anti-Rollback SVN
Setting this option enables will automatically activate the hardware-enforced Anti-
Rollback security version (HW ERB SVN). Once ME FW was successfully run on a
platform, FW with lower ARB-VN will be blocked from execution.
» Set HW-Enforced Anti-Rollback for Current SVN
Enable HW ERB mechanism for current ARB SVN value. FW with lower ARB-SVN
will be blocked from execution. The value will be restored to disable after the
command is sent.
48
Security