Table of Contents
Advertisement
Error Cords of Auto-equalizing Function .
When correct measurement of car interior acoustic characteristics is not
possible with the Auto-equalizer, the following error messages are dis-
im
v4
2
played. After checking, try again.
a
MIC ERROR
Microphone is not connected.
Plug in the supplied microphone
securely into the jack.
SPEAKER ERROR
The microphone cannot pick up
Confirm that the speakers are
the measuring tone of the middle/
connected correctly.
bass speaker unit in PRO mode or
Set the input level setting of the power
the front and rear speakers in STD
amp connected to the speakers
mode.
correctly.
Correctly set the microphone.
Confirm that the Network mode mute
is OFF,
NOISE ERROR
The surrounding noise level is too
Stop your car in a place that's as quite
high.
as possible, and switch off the engine
and air conditioner or heater.
Correctly set the microphone.
Auto-equalizer Function:
The Auto-equalizer creates three types of Auto-equalizer curves to com-
pensate for car interior acoustic characteristics.
You can switch between these Auto-equalizer curves as desired.
About Auto-equalizer Curves
NATURAL
Natural
Compensation providing nearly flat equalization for a
smooth, natural sound.
MILD
Mild
Optimum compensation for listening to quiet music.
DYNAMIC
Dynamic
Optimum compensation for jazz, rock and other music.
Advertisement
Table of Contents
