Table of Contents
Advertisement
Using the RDS Functions
' P l Seek Function:
The tuner searches for another frequency broadcasting the same program-
ming. "Seek" appears on the display and the radio volume is muted during
a PI Seek. The muting is discontinued after completion of the PI Seek,
whether or not the PI seek was successful. If the PI Seek is unsuccessful,
the tuner returns to the previous frequency.
PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broad-
casting signal is too weak for proper reception, the PI Seek will automati-
3
cally start.
Auto PI Seek (for preset station)
When preset stations cannot be recalled, as when traveling long distances,
the product can be set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFF.
Note:
* Refer to "Initial Setting" for details on how to switch Auto PI Seek ON/OFF.
Regional:Function
2.0
When AF is used to retune the tuner automatically, Regional (Regional)
limits the selection to stations broadcasting regional programs.
Note:
¢ Regional programming and regional networks are organized differently depend-
ing on the country (i.e., they may change according to the hour, state or broadcast
area).
* The preset number may disappear on the display if the tuner tunes in a regional
station which differs from the originally set station.
Activating the Regional Function
The Regional function can be turned ON independently for each FM band.
1. Select the Regional mode (Regional) in the Function Menu.
2. Activate or deactivate Regional while in an FM band.
STEREQCD
"REG"
To cancel the Function Menu, press the BAND button.
Advertisement
Table of Contents
