Pioneer DEH-P945R Operation Manual page 55

One way to assure a more natural sound is to clearly position the stereo
sound image (putting you in the center of the sound field).
The Position Selector function adjusts delay time and volume level of
sound from each speaker to match seat positions and the number of people
in the car, and lets you recall settings at the touch of a button. The result is
a natural sound regardless of the seat you are sitting in.
A Front seat
Vv Front and Rear seat
< Driver's seat (steering located on the LEFT side)
> Driver's seat (steering located on the RIGHT side)
Note:
¢ In the PRO mode, front and rear seats cannot be selected.
About the Position Indicator
This lets you confirm current Position setting without switching to the
Position Selector mode.
Front-Left Front-Right Front
C,, Sa
Y
All
EN ha TEN can
=
sw
Setting the Listening Position
1. Select the Position Selector mode (Position) in the DSP
Function Menu.
2. Press one of buttons A/W/<4/> to select the desired Position.
(e.g. Press button <.)
To cancel the listening position, press the same button again.
Note:
* Inthe PRO mode, pressing the W button cancels the listening position.
mes
ws
Q
ste
"
x