Table of Contents
Advertisement
In this menu you can select DSP Functions.
¢ Select the desired mode in the DSP Function Menu.
In
Z
75)
i
7)
=
fauna CSF
AL EG Mole
areca
€€ AUTO EGUALIZING 9>
Each press
changes the Mode ...
m PRO mode
Each press of the DSP button selects the mode in the following order:
Auto-equalizer mode (A.EQ Mode)* — Balance Adjustment mode
(Balance) -> Graphic Equalizer mode (EQ-Nuance) — 13-Band Graphic
Equalizer Adjustment mode (EQ-Fine)** —> Position Selector mode
(Position)
* Tf Auto-equalizing is not performed, you cannot switch to the Auto-equalizer
mode.
** You can switch to the 13-Band Graphic Equalizer Adjustment mode only when
selecting a user curve in the Graphic Equalizer mode.
To cancel the DSP Function Menu, press the BAND button.
Note:
¢ After entering the DSP Function Menu, if you do not perform an operation within
about 30 seconds, the DSP Function Menu is automatically canceled.
m STD mode
Each press of the DSP button selects the mode in the following order:
Auto-equalizer mode (A.EQ Mode)* — Balance Adjustment mode (Fader)
—» Graphic Equalizer mode (EQ-Nuance) — 13-Band Graphic Equalizer
Adjustment mode (EQ-Fine)** — Sound Field Control (SFC Cee =
Position Selector mode (Position)
* Tf Auto-equalizing is not performed, you cannot Switch: to the Auto- ernie
mode.
** You can switch to the 13-Band Graphic Equalizer Adjustment mode only when
selecting a user curve in the Graphic Equalizer mode.
To cancel the DSP Function Menu, press the BAND button.
Note:
¢ After entering the DSP Function Menu, if you do not perform an operation within
about 30 seconds, the DSP Function Menu is automatically canceled.
Advertisement
Table of Contents
