Table of Contents
Advertisement
Low-NW
Subwoofer LPF
3
4
Mid_HPF-NW
Middle/bass speaker HPF
5
Mid_LPF-NW
Middle/bass speaker LPF
6
High-NW
High-range speaker HPF
Note:
* In the PRO mode when setting the Subwoofer (Low-NW), you can switch
between Menaural/Stereo subwoofer output. (Refer to "Subwoofer
Monaural/Stereo Switching" on page 67.)
STD mode
4
Sub-W-NW
Subwoofer LPF
Front-NW
Front speaker HPF
Rear-NW
Rear speaker HPF
Press one of buttons 3—6 for 2 seconds or more to mute other
speaker units other than the speaker unit using the filter to be
adjusted. (e.g. Press the button other than button 4.)
a, err
oe "DSP
mae
GHz : Bd)
Cc
Hold for 2 seconds
* "Mute : On"
* If you mute the selected speaker unit (filter), "Mute : On" is indicated and adjust-
ment is not possible. .
To cancel muting, press the same button again for 2 seconds or more.
You can mute each speaker unit (filter). When a speaker unit is muted, no
sound is output from that speaker. Perform network adjustment while
switching mute ON/OFF as required.
Note:
¢ Inthe STD mode, button 3 does not function.
mes
rZ,
2)
mo
a
ot
Advertisement
Table of Contents
