Table of Contents
Advertisement
36
Watching on a TV Screen
You can use the camcorder as a VCR. Connect the camcorder to the TV by using the supplied A/V
connecting cable. There are two ways to connect the camcorder to your TV. When monitoring the
playback picture by connecting the camcorder to your TV, we recommend you use the house current
for the power source (p. 22).
While playing back on a TV screen, close the LCD panel to reduce noise during various playback.
Connecting Directly to a TV
Connect the camcorder to the inputs on the TV by using the supplied A/V connecting cable. Set the
TV/VCR selector on the TV to VCR.
lf you are going to connect the camcorder using the S video cable [a], you do not need to connect the
yellow (video) plug of the A/V connecting cable {b].
If Your VCR is Already Connected to a TV
Connect the camcorder to the LINE IN inputs on the VCR by using the A/V connecting cable. Set the
TV/VCR selector on the TV to VCR.
r
&
Zk
cS Lp
S-VIDEO IN
ial Neko
N
=
P| 2,
INT
>,
S&S
PS Vy,
SOR
CRG)
AUDIO Se
cot:
Signal flow
AUDIO IN
If your TV or VCR is a monaural type
Connect only the white plug for audio on both the camcorder and the TV or the VCR. With this
connection, the sound is monaural.
To connect a TV or a VCR without audio/video input jacks
Use an RFU adaptor (not supplied).
Advertisement
Table of Contents
