Table of Contents
Advertisement
identifying the Parts
Attaching the shoulder strap
Preparing the Remote Commander
Attach the supplied shoulder strap to the hooks for the shoulder strap (39 on page 52).
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA
(R6) batteries.
(1) Remove the battery cover from the Remote Commander.
(2) Insert both of the size AA (R6) batteries with connect poiarity.
(3) Put the battery cover back onto the Remote Commander.
Remote Commander
The buttons that have the same name on the Remote Commander and on the camcorder function
identically.
Note on battery life
The battery for the Remote Commander last about 6 months under normal operation. When the
batteries become weak or dead, the Remote Commander does not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.
Using the Remote Commander
Make sure that the COMMANDER mode is set to ON in the menu system (p.32).
MENU
COMMANDER |QN!
OFF
a
Hi
1| Transmitter
Point toward the remote sensor to control the camcorder after turning on the POWER switch on the
camcorder.
[MENU] : END
2} Tape transport buttons (p.18, 19)
[3] DISPLAY button (p.19)
4) Size AA (R6) battery holder
[5| START/STOP button
6] Power zoom button
The zooming speed is unchangeable on the Remote Commander.
Advertisement
Table of Contents
